Products >   Mold Cooling System
   



 

  Air-cooled type
  • In case only a narrow space exists within a factory or there is a problem of installing the cooling tower, the air-cooled type is the most optimal.
  • The conventional air-cooled type has a problem such as insufficient cooling capability in the summer time due to an installation problem of condenser. However, the HCA(Air cooled type) that completely resolved the above problems and obstacles is a machine that can run under all weathers.

 
  Water-cooled type
  • As a cooling system that was designed by emphasizing the characteristics of water-cooled type, this system exerts cooling effects sufficiently at the high temperature in the summer time
  • The piping organization is one-touch type, and also the contact parts with this mold are one-touch coupling so that a user can run this system simply
  • According to cooling capabilities, several molds can be simultaneously cooled.

 

 

 

 
MODEL
POWER
(KW)
COMPRESSORE
(KW)
COOLING
(KCAL/hr)
Cold water :7℃
PUMP
COOLING
TOWER
(M/T)
SIZE
Applied injection system
POWER Capacity
ℓ/min
CW-3
3.5
2.4
7,300
0.4
40
2.91
600x900x1300
20
CW-5
6.7
3.7
13,800
0.75
70
4.5
600x900x1500
40
CW-7.5
9.7
5.5
20,000
0.75
70
6.34
800x1000x1500
50
CW-10
12.7
7.5
28,000
1.5
155
9.05
1200x1200x1800
60
CW-15
18.2
11
45,500
1.5
155
12.5
1200x1400x2000
70
CW-20
22.5
15
55,000
2.4
280
15
1500x1000x2000
100
 


* We separately order the special specifications except for the standard product.

 

 

 


copyright